Recent publications

A comparative study of mechanical properties, thermal conductivity, residual stresses and wear resistance of aluminum-alumina composites obtained by squeeze casting and powder metallurgy J. Maj, W. Węglewski, K. Bochenek, Ł. Rogal, S. Woźniacka, M. Basista Metallurgical and Materials Transactions A (in press) (2021)

Solution combustion synthesis of a nanometer-scale Co3O4 anode material for Li-ion batteries M. Michalska, H. Xu, Q. Shan, S. Zhang, Y. Dall'Agnese, Y. Gao, A. Jain, M. Krajewski Beilstein Journal of Nanotechnology, 12, 424-431, (2021)

Structural, electrical and electrochemical studies of ionic liquid‑based polymer gel electrolyte using magnesium salt for supercapacitor application based nanofibers A. Gupta, A. Jain, S. K. Tripathi Journal of Polymer Research, 28, 235, (2021)

Impact of Thermal Oxidation on Morphological, Structural and Magnetic Properties of Fe-Ni Wire-Like Nanochains, M. Krajewski, M. Tokarczyk, S. Lewińska, K. Bochenek, A. Ślawska-Waniewska, Metallurgical and Materials Transactions A, 52,  3530-3540 (2021)

Electrophoretically deposited high molecular weight chitosan/bioactive glass composite coatings on WE43 magnesium alloy A. Witecka, S. Valet, M. Basista, A. R. Boccaccini, Surface and Coatings Technology, 418, 127232 (2021)

Biomass-derived activated carbon material from native European deciduous trees as an inexpensive and sustainable energy material for supercapacitor application A. Jain, M. Ghosh, M. Krajewski, S. Kurungot, M. Michalska, Journal of Energy Storage, 34, 102178 (2021)

Nonlocal layerwise formulation for bending of multilayered/functionally graded nanobeams featuring weak bonding H. Darban, A. Caporale, R. Luciano, European Journal of Mechanics - A/Solids, 86, 104193 (2021)

Efficiency of injected anchors in masonry elements: Evaluation of pull-out strength F. Ceroni, H. Darban, N. Caterino, R. Luciano, Construction and Building Materials 267121707 (2021)

Nonlocal layerwise formulation for interfacial tractions in layered nanobeams F. Fabbrocino, H. Darban, R. Luciano, Mechanics Research Communications 109103595 (2020)

Size-dependent linear elastic fracture of nanobeams H. Darban, F. Fabbrocino, R. Luciano, International Journal of Engineering Science, 157103381 (2020)

Structural, electrical and electrochemical studies of sodium ion conducting blend polymer electrolytesn A. Gupta, A. Jain, M. Kumari, S.K. Tripathi, Materials Today: Proceedings, 34, 780-786 (2021)

Structural and electrochemical studies of bromide derived ionic liquid-based gel polymer electrolyte for energy storage application A. Gupta, A. Jain, S.K. Tripathi, Journal of Energy Storage, 32, 101723 (2020)

Enhancement of fracture toughness of hot-pressed NiAl-Re material by aluminum oxide addition K. Bochenek, W. Węglewski, J. Morgiel, M. Maj, M. Basista, Materials Science & Engineering A, 720, 139670 (2020)

Amorphous FexCo1–x Wire-like Nanostructures Manufactured through Surfactant-Free Magnetic-Field-Induced Synthesis M. Krajewski, Sz-Ch. Liou, W.-A. Chiou, M. Tokarczyk, A. Małolepszy, M. Płocińska, A. Witecka, S. Lewińska, A. Ślawska-Waniewska, Crystal Growth & Design, 20, 3208-3216 (2020)

Enhancement of mechanical properties of vertically aligned carbon nanotube arrays due to N+ ion irradiation Dariusz M. Jarząbek,  C. Harvey, N. Levintant-Zayonts, T. Wojciechowski, M. Gniadek, M. Krajewski, S. Pathak, Nanotechnology, 31285703 (2020)

Experimental and Numerical Investigation of the Deformation and Fracture Mode of Microcantilever Beams Made of Cr(Re)/Al2O3 Metal–Matrix Composite W. Węglewski, P. Pitchai, K. Bochenek, G. Bolzon, R. Konetschnik, B. Sartory, R. Ebner, D. Kiener, M. BasistaMetallurgical and Materials Transactions A, 51(5), 2377-2390 (2020)

Anomalous size effect in thermal residual stresses in pressure sintered alumina-chromium composites W. Węglewski, M. Krajewski, K. Bochenek, P. Denis J. Wysmołek, M. BasistaMaterials Science & Engineering A762, 138111 (2019)

Optical measurements of thermal residual stresses in alumina reinforced with chromium M. Krajewski, W. Węglewski, K. Bochenek, J. Wysmołek, M. BasistaJournal of Applied Physics125, 135104 (2019)

Influence of rhenium addition on microstructure, mechanical properties and oxidation resistance of NiAl obtained by powder metallurgy K. Bochenek, W. Węglewski, J. Morgiel, M. BasistaMaterials Science & Engineering A735, 121-130 (2018)

Impact of thermal oxidation on chemical composition and magnetic properties of iron nanoparticlesM. Krajewski, K. Brzózka, M. Tokarczyk, G. Kowalski, S. Lewińska, A. Ślawska-Waniewska, W.S. Lin, H.M. Lin, Journal of Magnetism and Magnetic Materials, 458, 346-354 (2018)

pH-Responsive Saloplastics Based on Weak Polyelectrolytes: From Molecular Processes to Material Scale Properties G. Rydzek, A. Pakdel, A. Witecka, D.N.A. Shri, F. Gaudiere, V. Nicolosi, P. Mokarian-Tabari, P. Shaaf, F. Boulmedias, K. Ariga, Macromolecules51(12), 4424-4434, (2018)

A comprehensive analysis of extrusion behavior, microstructural evolution, and mechanical properties of 6063 Al–B4C composites produced by semisolid stir casting A. Pakdel, A. Witecka, G. Rydzek, D. Noorfazidah Awang Shri, V. Nicolosi (2018), Materials Science & Engineering A, 72128-37 (2018)

Effect of microstructure on mechanical properties and residual stresses in interpenetrating aluminum-alumina composites fabricated by squeeze casting J. Maj, M. Basista, W. Węglewski, K. Bochenek, A. Strojny-Nędza, K. Naplocha, T. Panzer, M. Tatarkova, F. Fiori, Materials Science & Engineering A, 715, 154-162 (2018)

Processing Induced Flaws in Aluminum–Alumina Interpenetrating Phase Composites M. Basista, J. Jakubowska, W. Węglewski, Advanced Engineering Materials19(1700484), 1-14 (2017)

Numerical modeling of deformation and fracture of reinforcing fibers in ceramic–metal composites Z. Poniżnik, Z. Nowak, M. Basista, International Journal of Damage Mechanics18(5), 711-734 (2017)

Influence of material coating on the heat transfer in a layered Cu-SiC-Cu systems A. Strojny-Nędza, K. Pietrzak, M. Teodorczyk, M. Basista, W. Węglewski, M. Chmielewski, Archives of Metallurgy and Materials, 62, 1311-1314 (2017)

A comprehensive microstructural analysis of Al–WC micro- and nano-composites prepared by spark plasma sintering A. Pakdel, A. Witecka, G. Rydzek, D. Noorfazidah Awang Shri, Materials and Design119, 225-234 (2017)

Nanocomposite composed of multiwall carbon nanotubes covered by hematite nanoparticles as anode material for Li-ion batteries, M. Krajewski, P.H. Lee, S.H. Wu, K. Brzózka, A. Małolepszy, L. Stobiński, M. Tokarczyk, G. Kowalski, D. Wasik, Electrochimica Acta, 228, 82-90 (2017)

Recent advances in research on magnesium alloys and magnesium–calcium phosphate composites as biodegradable implant materials K. Kuśnierczyk, M. Basista, Journal of Biomaterials Applications31(6), 878-900 (2017)

Micro-CT Finite Element Analysis of Thermal Residual Stresses and Fracture in Metal-Ceramic Composites M. Basista, W. Węglewski, K. Bochenek, Z. Poniżnik, Z. Nowak, Advanced Engineering Materials, 19(8), 1600725 (2017)

Rhenium doped chromium–alumina composites for high-temperature applications M. Chmielewski, K. Pietrzak, M. Basista, W. Węglewski, Int. Journal of Refractory Metals and Hard Materials54, 196–202 (2016)

Advances in processing of NiAl intermetallic alloys and composites for high temperature aerospace applications K. Bochenek, M. Basista, Progress in Aerospace Sciences, 79, 136-46 (2015)

The Influence of Electrocorundum Granulation on the Properties of Sintered Cu/Electrocorundum Composites A. Strojny-Nędza, K. Pietrzak, W. Węglewski, Science of Sintering, 47, 249-258 (2015)

Effect of grain size on thermal residual stresses and damage in sintered chromium–alumina composites: Measurement and modeling W. Węglewski, M. Basista, A. Manescu, M. Chmielewski, K. Pietrzak, Th. Schubert, Composites Part B, 67, 119–124 (2014)

Comparative assessment of Young's modulus measurements of metal-ceramic composites using mechanical and non-destructive tests and micro-CT based computational modeling W. Węglewski, K. Bochenek, M. Basista, Th. Schubert, U. Jehring J. Litniewski, S. Mackiewicz, Computational Materials Science, 77, 19–30 (2013)

Comparison of experimental and modelling results of thermal properties in Cu-AlN composite materials M. Chmielewski, W. Węglewski, Bulletin of the Polish Academy of Sciences: Technical Sciences, 61, 507-514 (2013)

Modeling of thermally induced damage in the processing of Cr-Al2O3 composites W. Węglewski, M. Basista, M. Chmielewski, K. Pietrzak, Composites Part B, 43, 255-264 (2012)

Thermal residual stresses generated during processing of Cr-Al2O3 composites and their influence on macroscopic elastic properties W. Węglewski, M. Chmielewski, D. Kaliński, K. Pietrzak and M. Basista, Advances in Science and Technology, 65, 27-32 (2010)

Chemically-assisted damage of concrete: A model of expansion under external sulfate attack M. Basista, W. Węglewski, International Journal of Damage Mechanics, 18, 155-175 (2009)

Effective elastic properties of interpenetrating phase composites Z. Poniżnik, V. Salit, M. Basista and D. Gross, Computational Materials Science, 44, 813-820 (2008)

Micromechanical modelling of sulphate corrosion in concrete: Influence of ettringite forming reaction M. Basista, W. Węglewski, Theoretical and Applied Mechanics (Belgrade), 35, 29-52 (2008)

Modelling of damage and fracture in ceramic-matrix composites - an overview M. Basista, W. Węglewski, Journal of Theoretical and Applied Mechanics, 44, 455-484 (2006)